BSD E20 Timer v1.0
This timer was designed specifically for the NFFS Provisional E20 event. The timer will power and time the motor run and then time and activate the DT system. Times are set with adjustable pots.
- Motor run time 1 - 23 seconds
- DT time 1 - 223 seconds
- Power 1S lipo cell
- Max motor current 3 amps
- Weight 2.5 grams
- Board size 0.78 x 0.78 inch
Note: DT actuator is remotely mounted.
DT timing starts when motor shuts off.