BSD E20 Timer v2.0
This timer was designed specifically for the NFFS Provisional E20 event. The timer will power and time the motor run and then time and activate the DT system. Times are set with BSD Timer Programmer, or external plug-in resistors.
- Motor run time 1 - 22 seconds in 12 steps
- DT time 1 - 180 seconds in 12 steps
- Power 1S lipo cell
- Max motor current 3 amps
- Weight 2.5 grams
- Board size 0.78 x 0.78 inch
Note: DT actuator is remotely mounted.
DT timing starts when motor shuts off.